top of page


Corrosion Inhibitor

General Description:

In-Hib 100 is a clear, lightly colored liquid. The active components are a blend of organic amines, a quaternary amine, and glycol in an aqueous solution.

Recommended Uses:
In-Hib 100 is used in all brines to limit the corrosion due to oxygen and to inhibit scale formation.

Major Advantages:
In-Hib 100 is soluble across the density range of oil field brines.
In-Hib 100 is easy to apply. No special mixing required.

Recommended Treatment:
For most applications, In-Hib 100 is used at a rate of one 55 gallon container per 200 barrels of treated brine.

Safety and Handling:

Avoid skin and eye contact. Avoid inhalation or ingestion. If exposed, wash skin with soap and water, flush eyes with water and seek medical assistance. If ingested, seek medical assistance. Remove contaminated clothing and wash before reusing. Have adequate ventilation or use proper respirator. Wear protective face shield.
Dispose of according to applicable regulations.
Consult MSDS prior to use.

Packaging:
In-Hib 100 is available in 55 gallon drums.

Availability and Pricing:
In-Hib 100 can be purchased from any Shellco stock point or from the main Plant in Houston, Texas. Standard pricing is per 55 gallon container.

In-Hib 100 (Corrosion Inhibitor)

$0.00Price
$0.00 per 55 Gallons
Quantity
  • SECTION 1: CHEMICAL PRODUCT - COMPANY IDENTIFICATION


    Shellco International, Inc.
    38 Sweet Leaf Court
    The Woodlands, TX 77381
    (281) 296-2922


    (800) 424-9300 - CHEMTREC (24 Hour Emergency Response)

    PRODUCT: In-Hib 100
    SYNONYMS: None
    CHEMICAL FAMILY: Aqueous mixture of amines and solvent
    MSDS CREATION DATE: Oct. 16, 2000
    MSDS REVISION DATE:



    SECTION 2: COMPOSITION, INFORMATION ON INGREDIENTS

    The composition information and/or the composition of one of the components of this product is proprietary. In the event of a medical emergency, spill or fire, compositional information will be revealed to responding emergency personnel.

    COMPONENTS: Amines, Methanol, Hexylene Glycol, Quaternary Amine, Water
    CAS NUMBER: Amines (proprietary), Methanol (67-56-1), Hexylene Glycol (107-41-8), Quaternary Amine (proprietary)
    RTECS NUMBER: n/a
    PERCENTAGE: Amines (20-40), Methanol (1-5), Hexylene Glycol (1-5), Quaternary Amine (5-10)
    PROBABLE CONTAMINANT: None known.


    SECTION 3: HAZARDS IDENTIFICATION

    NFPA RATINGS: (SCALE 0-4): HEALTH=1, FIRE=0, REACTIVITY=0
    EMERGENCY OVERVIEW: Pale, clear liquid with amine odor. The toxicological properties have not been fully investigated. Avoid contact with eyes, skin and clothing. May cause skin and eye irritation and/or possible burns. Inhalation of vapors may cause irritation of the respiratory tract. Work in well ventilated area. Wash thoroughly after handling.





    POTENTIAL HEALTH EFFECTS:
    INHALATION:
    Short Term Effects: Can cause severe irritation. Additional effects may include coughing and shortness of breath.
    Long Term Effects: No information available.
    SKIN CONTACT:
    Short Term Effects: Can cause severe irritation. Corrosive to skin, possibly resulting in third degree burns depending on length of exposure.
    Long Term Effects: Same effects as short term exposure.
    EYE CONTACT:
    Short Term Effects: May cause irritation and/or burns.
    Long Term Effects: Same effects as short term exposure.
    INGESTION:
    Short Term Effects: May cause gastrointestinal irritation. May be harmful.
    Long Term Effects: No information available.
    CARCINOGEN STATUS:
    OSHA: No NTP: No IARC: No


    SECTION 4: FIRST AID MEASURES

    INHALATION: Remove from exposure area to fresh air immediately. If breathing is difficult, give oxygen. Oxygen should be given by trained medical personnel only. If breathing has stopped, perform artificial resuscitation. Keep person warm and at rest. Treat symptomatically and supportively. Get medical attention immediately.
    SKIN CONTACT: Remove contaminated clothing and shoes immediately. Wash affected area with soap or mild detergent and large amounts of water until no evidence of product remains (at least 15-20 minutes). Get medical attention if irritation persists.
    EYE CONTACT: Flush eyes immediately with large amounts of water or normal saline solution, occasionally lifting upper and lower lids until no evidence of substance remains (approximately 15-20 minutes). Get medical attention immediately.
    INGESTION: Not an expected pathway in the industrial environment. Treat symptomatically and supportively. Do not induct vomiting. If vomiting occurs, keep head lower than hips to prevent aspiration. Get medical attention immediately.

    NOTE TO PHYSICIAN: Antidote: No specific antidote. Treat symptomatically and supportively.


    SECTION 5: FIRE FIGHTING MEASURES

    FIRE AND EXPLOSION HAZARD: This product is not defined as flammable or combustible. Under certain conditions, when exposed to heat or flame, it may support combustion.
    EXTINGUISHING MEDIA: In case of fire, utilize dry chemical, carbon dioxide, water spray or foam. For larger fires, use water spray, fog or foam. Use an extinguishing agent suitable for type of surrounding fire and/or chemicals.
    FIREFIGHTING: Move product containers from fire area if you can without risk. Do not use water directly on material; do not scatter the material. Apply cooling water to sides of containers that are exposed to flames until well after fire is out. Stay away from ends of tanks. Avoid breathing toxic vapors, keep upwind. Extinguish fire using agent suitable for type of surrounding fire and/or chemicals. Avoid breathing vapors; keep upwind. Dike area to prevent runoff and contamination of water sources.
    HAZARDOUS COMBUSTION PRODUCTS: Thermal decomposition may release toxic and hazardous oxides of carbon and nitrogen.


    SECTION 6: ACCIDENTAL RELEASE MEASURES

    OCCUPATIONAL RELEASE: Keep unnecessary people away. Isolate hazard area and deny entry to avoid material dispersal. Stop leak if you can do it without risk. Do not touch spilled material. For small spills, material should be absorbed into an inert material and placed into containers for later disposal. For larger spills, dike far ahead of spill for later disposal. Wash thoroughly after handling.


    SECTION 7: HANDLING AND STORAGE

    Observe all federal, state and local regulations when storing this product. Store in a tightly closed container. Store away from incompatible materials.


    SECTION 8: EXPOSURE CONTROLS, PERSONAL PROTECTION

    EXPOSURE LIMITS: No occupational exposure limits established by OSHA/ACGIH/NIOSH.
    VENTILATION: Provide local exhaust ventilation system.
    EYE PROTECTION: Wear safety glasses with side shields or safety goggles/shield to prevent contact with this product.
    EMERGENCY WASH FACILITIES: Where there is any possibility that an employee’s eyes and/or skin may be exposed to this product, an eye wash fountain and safety shower should be available.
    CLOTHING: Wear appropriate protective clothing and equipment to prevent skin contact with this product.
    GLOVES: Wear appropriate protective gloves to prevent contact with this product.
    RESPIRATOR: Under established uses and normal working conditions, respirator usage is not required. Contamination levels found in the working environment specific to the job assignment may dictate respirator requirements. Do not exceed the working limits of the respirator. Respirators must also be jointly approved by the National Institute for Occupational Safety and Health and the Mine Safety and Health Administration (NIOSH-MSHA).

    FOR FIREFIGHTING AND OTHER IMMEDIATELY DANGEROUS CONDITIONS: Any self-contained breathing apparatus that has a full facepiece and is operated in a pressure-demand or other positive-pressure mode. Any supplied-air respirator that has a full facepiece and is operated in a pressure-demand or other positive-pressure mode in combination with an auxiliary self-contained breathing apparatus operated in pressure-demand or other positive-pressure mode.

    SECTION 9: PHYSICAL AND CHEMICAL PROPERTIES

    DESCRIPTION: Brown liquid with amine odor
    pH: 9.2
    FLASH POINT: >212?F (100?C)
    MELTING POINT: Not applicable
    BOILING POINT: 212?F
    VAPOR PRESSURE: <0.1 mmHg @ 68?F (20?C)
    VAPOR DENSITY: Not available
    WATER SOLUBILITY: Soluble
    SPECIFIC GRAVITY: 1.08
    EVAPORATION RATE (BUTYL ACETATE=1): <1


    SECTION 10: STABILITY AND REACTIVITY

    REACTIVITY: Stable at normal temperatures and pressures
    CONDITIONS TO AVOID: None known
    INCOMPATIBILITIES: Avoid contact with nitrous acid, organic or inorganic nitrites or atmospheres with high nitrous oxide concentrations. N-nitrosamines may be be formed.
    Avoid contact with strong oxidizers.
    HAZARDOUS DECOMPOSITION: Thermal decomposition products may include toxic and hazardous oxides of carbon and nitrogen.
    POLYMERIZATION: Has not been reported to occur under normal temperatures and pressures.


    SECTION 11: TOXICOLOGICAL INFORMATION

    TOXICITY DATA: Data not available
    CARCINOGEN STATUS: Data not available
    LOCAL EFFECTS: Data not available
    ACUTE TOXICITY LEVEL: Data not available
    TARGET EFFECTS: Data not available
    INHALATION:
    Acute Exposure: Data not available
    Chronic Exposure: Data not available
    SKIN CONTACT:
    Acute Exposure: Data not available
    Chronic Exposure: Data not available
    EYE CONTACT:
    Acute Exposure: Data not available
    Chronic Exposure: Data not available
    INGESTION:
    Acute Exposure: Data not available
    Chronic Exposure: Data not available



    SECTION 12: ECOLOGICAL INFORMATION

    ENVIRONMENTAL IMPACT RATING (0-4): No data available
    ACUTE AQUATIC TOXICITY: No data available
    DEGRADABILITY: No data available
    LOG BIOCONCENTRATION FACTOR (BCF): No data available
    LOG OCTANOL/WATER PARTITION COEFFICIENT: No data available




    SECTION 13: DISPOSAL INFORMATION

    Observe all federal, state and local regulations when disposing of this product.




    SECTION 14: TRANSPORT INFORMATION

    DOT SHIPPING NAME: Amines, liquid, corrosive, n.o.s., (alkoxylated alkyl amines), 8 UN2735, PGII
    DOT HAZARD CLASS or DIVISION: 8
    DOT IDENTIFICATION NUMBER: UN2735
    DOT PACKING GROUP: II
    DOT LABEL CODES: 8
    DOT PACKAGING (refer to):
    Exceptions: 49 CFR § 173.154
    Non-Bulk: 49 CFR § 173.203
    Bulk: 49 CFR § 173.241
    DOT QUANTITY LIMITATIONS:
    Passenger Aircraft/Rail: 5 L
    Cargo Aircraft Only: 60 L









    SECTION 15: REGULATORY INFORMATION
    United States:
    (alkoxylated alkyl amines)
    TSCA STATUS: Yes
    40 CFR 302.4 CERCLA SECTION 103: No
    40 CFR 355.30 SARA SECTION 302: Yes

    40 CFR 355.40 SARA SECTION 304: No
    40 CFR 372.65 SARA SECTION 313: Yes
    40 CFR 370.21 SARA HAZARD CATEGORIES,
    SARA SECTIONS 311/312
    ACUTE HAZARD: No
    CHRONIC HAZARD: No
    FIRE HAZARD: No
    REACTIVITY HAZARD: No
    SUDDEN RELEASE HAZARD: No
    29 CFR 1910.119 OSHA Process Safety No
    STATE REGULATIONS:
    CALIFORNIA PROPOSITION 65: Yes
    PENN. HAZ. SUB. LIST Yes
    Foreign:
    (alkoxylated alkyl amines)

    CANADIAN DOMESTIC SUBSTANCE LIST (DSL) Yes
    EUROPEAN REGULATIONS (EINECS) Yes
    AUSTRALIAN INVENTORY of CHEMICAL SUBSTANCES (AICS) Yes
    KOREAN EXISTING CHEMICALS LIST (ECL) Yes

    SECTION 16: OTHER INFORMATION

    Personnel handling this product should be informed of the recommended safety precautions and should have access to this information.

    This information relates to the specific material designated and may not be valid for such material used in combination with other materials or processes. Such information is to the best of our knowledge and belief, accurate and reliable as of the date compiled. However, no representation, warranty or guarantee is made as to its accuracy, reliability, or completeness. It is the user's responsibility to satisfy themselves as to the suitability and completeness of such information for their own use and purpose. We do not accept liability for any loss or damage that may occur from the use of this information nor do we offer warranty against patent infringement.

    Shellco International, Inc. reserves the right to refuse shipment of this material to any person or organization who, in the judgement of Shellco International, Inc., does not demonstrate the ability to consistently handle and use it safely and in compliance with all applicable laws, rules and regulations.

    Customers are responsible for compliance with local, state, and federal regulations that may be pertinent in the storage, application, and disposal of this product

  • Product purchase with a 15% restocking fee.

    Warehousing available at $15.00 a day per tote.

bottom of page